sales@vedourissound.com
sales@vedourissound.com

Gas Audio Power Ενισχυτής αυτοκινήτου 2 channel Gas Audio MAX PA1-1500.2DZ1

495.00 €550.00 €ΕΚΠΤΩΣΗ 55.00 €

MAXIMUM EFFICIENCY EVOLVED The MAX PA1 series amplifiers are the next generation high efficiency, full range, Class D amplifiers – engineered to perfection with handpicked, high-grade components and innovative design features that guarantee long-time, maximum output performance. Component Amplifier Channels Two Input mode 2 ch Power RMS (1 Ohm) 2x1500W Power RMS (2 Ohm) 2x1000W Power RMS (4 Ohm) 2x620W Freq. response 15-22000 Hz Low Pass Filter 50-22000 Hz High Pass Filter 15-500 Hz S/N Ratio (A-weighted) >92dB Bass EQ 0-12dB @45Hz Crossover Slope 12dB Power Voltage 10-16V REM Voltage 10-16V Input Sensitivity 0.2-10V T.H.D 120 VCC – OPTIMIZED AIR FLOW The unique heatsink, in extruded aluminum with a reinforced A-star backplate, features thermal properties developed to optimize and control the amplifier temperature. The GAS VCC (Vented Cross Cooling) system keeps cool air flowing constantly forward over the components, forcing out the hot air through the thermal openings in the opposite side of the chassis. HIGH QUALITY VERSATILITY The advanced, full range, class D circuitry on a 4-layer PCB allows any type of speaker to be connected – subwoofers, drivers, tweeters or coaxials. The high/band pass filter is adjustable between 15-500Hz, and the low pass filter is adjustable from 50Hz all the way to 22000Hz. To fine tune the bass frequencies (45Hz) there is a 0-12dB Bass EQ level control. The PA1-1500.2DZ1 is available in Z1 version (max power @ 1 Ohm). POWER MANAGEMENT AND CONTROL The high-power, continuous output from the MAX PA1 series is made possible thanks to a high-voltage, stabilized power supply that fully monitors voltage variations from the car’s battery. The amplifiers also have a 4-way protection circuit system; Thermal-, Short circuit-, Overload Protection and a Turn on delay. Setting (and maintaining) the correct output level is optimized thanks to the Clip LEDs on the amplifier and the wired remote – No clip light indicates that the distortion is less than 1%, anything above and the advanced protection circuitry kicks in. To ensure a secure and stable input signal all models have high-quality Tiffany RCA connectors. SIZE MATTERS Using accurate sized cables will improve the current flow. MAX PA1-1500.2DZ1 have been equipped with plus-size 8AWG (10mm²) speaker cable outputs and actual sized 0AWG (50mm²) power and ground connectors, made to secure maximum performance.

Κωδικός: MAX PA1-1500.2DZ1

Μάρκα: Gas Audio Power

Διαθεσιμότητα: Σε στόκ

Άμεσα διαθέσιμο

Κλικ για Κλήση
Είμαστε στη διάθεσή σας!